Saltar al contenido principal

Cambios al paso #1

Editado por Iris Jimenez

Edicion aprobada por Iris Jimenez

Antes
Después
Sin cambios

Líneas de Paso

[title] How to start
[* black] Start by removing the screws of the back side of the camera.
[* red] Try to remember where each screw goes keep in mind there small keep them safe
- [* orange] when removing screws make sure you remove them all if one screw is still there you may ++break++ the camera check in all sides to be sure
+ [* orange] when removing screws make sure you remove them all if one screw is still there you may ++break++ the camera check in all sides to be sure. yes there are screws on the sides and on the bottom of the camera
[* black] be care full when removing this item