Cambios al paso #1
Editado por Seth Gordon —
Edicion aprobada por Seth Gordon
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* black] Use the spludger to gently pry up the ribbon connector at the bottom of the lens assembly on the motherboard. | |
| - | [* red] Gently holding back the lens assembly ribbon connector, use the spluder to lift the retention tab. Gentle slide the ribbon cable out. |
| + | [* red] Gently holding back the lens assembly ribbon connector, use the spluder to lift the ribbon cable retention tab. Gentle slide the ribbon cable out. |
| [* icon_caution] Beware the ribbon cables are delicate and easily damaged - avoid excessive pressure or bending. | |
| - | [* orange] Use the spludger to lift the retention tab at the bottom of the flash assembly and gently slide out the ribbon cable. |
| + | [* orange] Use the spludger to lift the ribbon calbe retention tab at the bottom of the flash assembly and gently slide out the ribbon cable. |