Saltar al contenido principal

Cambios al paso #6

Editado por Mira Patel

Edicion aprobada por Mira Patel

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Unscrew the two screws annotated with red circles holding the GPU heatsync (think "cooling system") in place
-[* black] It's on a hinge so swing it open then pull it straight up
+[* red] Unscrew the two screws (annotated with red circles) holding the GPU heatsync in place.
+[* black] Swing it open then pull it straight up.