Saltar al contenido principal

Cambios al paso #1

Editado por Kelsea Weber

Edicion aprobada por Kelsea Weber

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Remove the four 0.1mm screws from the bottom of the camera using the phillips head screwdriver
+[* red] Remove the four 0.1mm screws from the bottom of the camera using the phillips head screwdriver
[* black] Using the same screwdriver, remove the 2 screws on the side of the camera.
[* black] Remove the 2 screws from the other side of the camera.
[* icon_note] One of the screws is under the I/O port cover.