Saltar al contenido principal

Cambios al paso #2

Editado por James Pearson Hughes

Edicion aprobada por James Pearson Hughes

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Push on small white metal tabs at the side and pull up on the RAM.
-[* black] The RAM should be sticking out at about a 45 degree angle as shown in picture 2. Pull straight out on the RAM to remove it.
-[* icon_note] The RAM may stick slightly, if necessary wiggle back and forth gently to loosen.
+[* red] Push on the small white metal tabs on both sides of a module to unlock it.
+[* black] The RAM should be stick out at approximately a 45 degree angle. Grasp the RAM by the sides and pull straight out to remove it.
+ [* icon_note] If the RAM sticks slightly, wiggle it back and forth gently to loosen it.