Saltar al contenido principal

Cambios al paso #1

Editado por Sarah Van Putten Vink

Edicion aprobada por Sarah Van Putten Vink

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Use the PH000 Screw Driver from iFixit tool kit to unscrew the image stabilizer panel’s screws (there should be two of them)
-[* black] Panel should pop off once screws are removed
+[* red] Use the philips head 000 Screw Driver from iFixit tool kit to unscrew the two image stabilizer panel’s 2 mm philips head screws.
+[* black] Using your hands, remove image stabilizer panel.