Cambios al paso #2
Editado por Matthew Willis —
Edicion aprobada por Matthew Willis
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* black] Using precision tweezers, gently lift up on the black strip of the ZIF Connector securing the cable from the LCD to the motherboard. | |
| + | [* black] Then, gently remove the wire by pulling the base of the ribbon cable towards the LCD screen. |
| [* icon_caution] Do not poke or destroy the cable itself. Be careful to only grab the black fold in the tweezers. | |
| [* icon_note] The black strip will fold back to reveal the cable, but remain attached to the motherboard. |