Cambios al paso #6
Editado por Virginia Riedel —
Edicion aprobada por Virginia Riedel
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* black] For this step, you will need to cut a small piece of electrical wire that is long enough to reach the ground connectors on each side of the headphone jack | |
| [* black] The connectors are indicated with the red boxes (picture 1) | |
| [* black] Place the wire so that it goes around the connector indicated by the red arrows and lines (picture 2) | |
| - | [* |
| + | [* icon_caution] The wire ++***MUST***++ go ++***AROUND ***++ the connector for the device to close properly |