Cambios al paso #2
Editado por Thomas Rill —
Edicion aprobada por Thomas Rill
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* red] Locate the screw holding the orange ribbon cable in place. | |
| [* orange] Locate the tape holding the ribbon cable down. | |
| [* black] Unscrew the screw with a j000 Philips head bit. | |
| - | [* icon_note] Using screwdriver bits that do not fit snugly in the screw have a tendency to strip the screw and render it unusable. |
| - | [* black] Remove the tape by gently scraping |
| + | [* icon_note] Using screwdriver bits that do not fit snugly in the screw head have a tendency to strip the screw and render it unusable. |
| + | [* black] Remove the tape by gently scraping the edges up with a black plastic spudger. |