Cambios al paso #3
Editado por Rachel —
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* black] Open the battery cover by sliding it in the direction of the arrow. |
|---|---|
| - | [* red] Remove the two (3mm) screws next to the memory card slot. |
| + | [* black] On the side parallel to the rubber cover, open the battery casing by pushing slightly in the direction of the arrow. |
| + | [* red] Note: you may see a memory card. If so, remove the card by pushing down on it until you hear a click, and it will come loose so you can gently pull it out. |
| + | [* black] Using the Phillips head screwdriver, remove the two screws on either side of the memory card, and set them aside. |