Cambios al paso #10
Editado por Luis Gomez —
- Antes
- Después
- Sin cambios
Líneas de Paso
| + | [* black] Removing Modem card if applicable. |
|---|---|
| + | [* black] Locate Modem bay on the middle left of the laptop next to the cooling assembly. |
| + | [* black] Disconnect the ribbon cable by unlocking the two side pressure pins, then pulling the ribbon cable free little force is necessary. |
| + | [* black] Remove 1 screw using a #0 Philip Screwerdriver. |
| + | [* black] Pull the modem card out but be careful because there is another cable underneath it. |
| + | [* black] Remove the 2 pin cable from underneath from the 2 pin header found on the modem card's PCB. |
Imagen 1
Ninguna imagen anterior
Añadido