Cambios al paso #12
Editado por Johneli Jimenez-Diaz —
Edicion aprobada por Johneli Jimenez-Diaz
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* red] Use the spudger to carefully remove the attached ribbon cable. |
|---|---|
| + | [* red] Use the spudger to carefully remove the attached ribbon cable from the ZIP connector on the right side of the motherboard. |
| [* icon_note] Alternate on both sides of ribbon cable to remove evenly from the ZIF connector every time you use a spudger. | |
| - | [* |
| + | [* black] Be careful not to rip the ribbon cable out of the ZIF connector while removing. |