Cambios al paso #11
Editado por Johneli Jimenez-Diaz —
Edicion aprobada por Johneli Jimenez-Diaz
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* red] Use the spudger to carefully remove the attached ribbon cable from the ZIF connector. |
|---|---|
| + | [* red] Use the spudger to carefully remove the attached ribbon cable from the ZIF connector located on the bottom right of the motherborad. |
| [* icon_note] Alternate on both sides of ribbon cable to remove evenly from the ZIF connector every time you use a spudger. |