Cambios al paso #7
Editado por Johneli Jimenez-Diaz —
Edicion aprobada por Johneli Jimenez-Diaz
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* red] Remove the 3 mm |
|---|---|
| - | [* icon_reminder] The |
| - | [* orange] Remove the next three 3.5 mm |
| + | [* red] Remove the 3 mm Phillips head screw between the circuit boards using the Phillips #00 Precision Screwdriver. |
| + | [* icon_reminder] The 4 mm screw between the circuit boards was taken off during step five of this guide. |
| + | [* orange] Remove the next three 3.5 mm Phillips head screws at the button circuit board using the Phillips #00 Precision Screwdriver. |