Cambios al paso #3
Editado por Eric —
Edicion aprobada por Scott Havard
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* red] Use the spudger to detach the green flat-top connector located under the rear camera. Slowly push the connector up and back. Refer to the first and second images. | |
| [* orange] Use the spudger to detach and lift the orange flat-top connector seen in the second image. Slowly push the connector up and back. | |
| - | [* yellow] Then, detach the remaining three flat-top connectors one at a time to release the motherboard from the housing. |
| + | [* yellow] Then, detach the remaining three flat-top connectors one at a time to release the motherboard from the housing. The third connector is hidden underneath the largest one. |