Cambios al paso #6
Editado por Jeremy Thompson —
Edicion aprobada por Jeremy Thompson
- Antes
- Después
- Sin cambios
Líneas de Paso
| + | [* black] On the bottom-left side of the phone is a little board that goes with this dual-ribbon board contraption. Be sure you give him a little push with your plastic prying tool, it'll eventually come loose. |
|---|---|
| + | [* black] Gently lift the board from the top with the power button/volume assembly in your fingers, now pry the bottom part of the board free of the phone housing. |
| + | [* black] The cables on the bottom can get caught on the bottom board, just be gentle as you lift it out of the phone. |
| + | [* black] In picture 3 there is a red box around a little plastic piece that comes with this assembly. Remember this tucks UNDER the board once you're putting it back in. |
Imagen 1
Ninguna imagen anterior
Añadido
Imagen 2
Ninguna imagen anterior
Añadido
Imagen 3
Ninguna imagen anterior
Añadido