Cambios a este Paso
Editado por Philip Le Riche —
Edicion aprobada por Philip Le Riche
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* black] Remove 4 screws from the edges of the lens rear plate. Release a clip near the motor in order to lift off the rear plate. Note that it’s still attached by ribbon cables, and care must be taken not to strain these too much. | |
| - | [* black] If disassembling further, note the orientation of the parts. |
| + | [* black] Lift the rear plate just a little in order to inspect the gear chain. Note the order of the gears if you are going to remove them. |
| + | [* black] If disassembling further, note the orientation of the concentric parts. |