Cambios al paso #4
Editado por Reed Crosby —
Edicion aprobada por Reed Crosby
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* red] Insert a small flat head screw driver into the slot shown. Pry the blue latch up to release the cable. |
|---|---|
| - | [* yellow] Use the pull tab to pull the keyboard connector straight up from the logic board |
| + | [title] Removing Ribbons |
| + | [* red] Insert a small flat head screwdriver or a spudger into the small notch in between holding down the ribbon. |
| + | [* yellow] Grab the metal bar on top of the keyboard connector and pull straight up. The cable should come free. |