Cambios al paso #14
Editado por Lauren Murphy —
Edicion aprobada por Adam O'Camb
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* black] With a screwdriver, loosen the four screws. | |
| - | [* black] then 2 |
| - | [* black] then 3 |
| - | [* black] then 4 |
| - | [* black] Do not completely loosen a screw. |
| - | [* black] Loosen each screw a little bit. Going from 1 then to 2 then to 3 and then to 4. Keep doing this until they are all loose. |
| - | [* black] Loosening one screw without the other screws may damage the logic board. |
| + | [* black] Loosen each screw a little bit, going from 1 then to 2 then to 3 and then to 4. Keep doing this until they are all loose. |
| + | [* icon_caution] Loosening one screw without the other screws may damage the logic board. |