Cambios al paso #6
Editado por Alex Diaz-Kokaisl —
Edicion aprobada por Alex Diaz-Kokaisl
- Antes
- Después
- Sin cambios
Líneas de Paso
| + | [* icon_note] The center chassis assembly is aligned to the bottom of the shell with guide pegs. These pegs will need to slide out of their slots to allow the chassis to be lifted out. |
|---|---|
| + | [* black] Grip the chassis and pull it towards the top of the shell, uncoupling the guide pegs from the shell. |
| + | [* black] Use two hands to lift out the chassis to remove it from the shell. |
| + | [* icon_reminder] During reassembly, make sure neither of the ribbon cables get pinched as you lower the center chassis into the shell. |
Imagen 1
Ninguna imagen anterior
Añadido
Imagen 2
Ninguna imagen anterior
Añadido
Imagen 3
Ninguna imagen anterior
Añadido