Saltar al contenido principal

Cambios al paso #4

Editado por Danielle

Edicion aprobada por Miroslav Djuric

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Remove indicated screw holding front of camera in place.
-[* black] Keep this screw separated from screws used in other steps.
+[* black] Using the blue plastic opening tool, remove the plastic covering you just removed screws from on the left side of camera.
+[* black] Gently pull up around edges until the plastic flap inside is pulled out and the piece swings upward (piece should pull free).