Cambios a este Paso
Editado por Kristen Gismondi —
Edicion aprobada por Kristen Gismondi
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* black] Each hole contains a Phillips-head screw that is 2.5 mm in diameter and 6 mm in length. Using the Phillips #1 screwdriver, turn counter-clockwise until loosened. Repeat this step for each screw until loosened. | |
| - | [* icon_note] Remember in the replacement process to turn the screwdriver clockwise to tighten the screws. |