Cambios al paso #3
Editado por Brendin Costa —
Edicion aprobada por Brendin Costa
- Antes
- Después
- Sin cambios
Líneas de Paso
| + | [* black] Carefully pry apart the mouse's top and bottom halves. Using the iFixit Opening Tool, start at one corner and work around the edge. Be cautious of the clips that may break during this process. |
|---|---|
| + | [* black] Locate the wire connection between the two halves. Using a plastic opening tool, gently pry the connector apart by moving side to side to avoid bending the pins. |
| + | [* icon_note] Be mindful that the connector only fits one way, as shown in the attached pictures. |