Cambios al paso #3
Editado por Sarah Westberg —
Edicion aprobada por Sarah Westberg
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* black] Open the bottom case gently. | |
| - | [* icon_caution] Do not rip it open as it is connected by a ribbon cable. |
| - | [* red] Remove the single 2 mm Phillips #1 screw holding the control panel to the joystick panel. |
| + | [* icon_caution] Do not rip it open as it is connected by a ribbon cable to the top case. |
| + | [* red] Remove the single 2 mm-long Phillips #1 screw securing the motherboard to the top case. |
| + | [* black] Use a spudger to gently remove the motherboard from the top case. |
| + | [* icon_caution] Be careful to avoid bending the board or the LED light. |