Cambios a este Paso
Editado por Jossel Solis —
Edicion aprobada por Jossel Solis
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* black] Ensure the device is powered off and not connected to an AC adapter. Remove the backing of the device to expose the hardware. |
|---|---|
| - | [* black] Remove the device's 9mm Phillips head screws with an Ifixit Screwdriver. The screwdriver is fitted with the 'JO' bit. |
| - | [* black] Then use the Ifixit opening tools to life the backing up and off of the device. The hardware will be exposed after following these steps. |
| + | [* black] Ensure the device is powered off and not connected to an AC adapter. |
| + | [* black] Remove the device's Japanese Industrial Standard screws with the iFixit Screwdriver. |
| + | [* icon_note] The screwdriver is fitted with the 'J0' bit. |
| + | [* black] Use the iFixit opening pick to lift the back cover from the device. The hardware will be exposed. |
| + | [* icon_note] It is helpful to get an opening in one spot of the back cover and carry that opening around the device. |