Saltar al contenido principal

Cambios al paso #1

Editado por Kristen Gismondi

Edicion aprobada por Kristen Gismondi

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Using a J000 screwdriver, unscrew the fan base by removing two screws on left fan and one screw on the right, each measuring 4.25 mm.
+[* red] Remove two 4.3 mm screws from the left fan and one 4.3 mm screw from the right fan using a JIS #000 screwdriver.