Saltar al contenido principal

Cambios al paso #1

Editado por Hector

Edicion aprobada por Hector

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Flipping over the device, locate these eight 5mm screws on the back cover.
+[* icon_note] ''The screws holding the back cover in place can not be removed.''
+[* red] Flip over the device and locate these eight 5mm screws on the back cover.
[* black] Use your multi-bit screwdriver with a J0 bit to loosen the screws.
-[* icon_note] Note that the screws will not be able to be pulled out.
[* black] Remove the back cover by lifting at the corners.