Cambios a este Paso
Editado por Sam Gustafson —
Edicion aprobada por Sam Gustafson
- Antes
- Después
- Sin cambios
Líneas de Paso
[title] De-solder shutter control flex | |
[* red] De-solder the connections. | |
[* black] Lift the flex off the retaining studs. | |
[* icon_caution] Be careful not to overheat the flex circuit. Work in short durations. Allow for cool downs in between if necessary. | |
- | [* icon_note] This step is not strictly necessary but it will greatly reduce the risk of tearing the flex cable when lifting the mirror box. |