Cambios al paso #6
Líneas de Paso
| + | [* red] Use the Phillips screwdriver to remove the two screws that attach the keyboard to the casing. |
|---|---|
| + | [* black] Once the screws are out, gently tip the keyboard up to view the ribbon cable beneath. |
| + | [* icon_caution] A ribbon cable connects the keyboard to the motherboard. Be gentle removing the keyboard as to not damage the ribbon cable beneath. |
| + | [* orange] Carefully unlatch and remove the ribbon cable from the motherboard by lifting up the black tab (with a spudger or finger) and slipping the cable out. |
| + | [* black] Put the keyboard off to the side. Make sure it is in a secure location. |
Imagen 1
Ninguna imagen anterior
Añadido
Imagen 2
Ninguna imagen anterior
Añadido
Imagen 3
Ninguna imagen anterior
Añadido