Cambios al paso #8
Editado por Joseph Saucier —
Edicion aprobada por Joseph Saucier
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* green] Reinstall the light pull-switch into the circuit by terminating the hot and neutral wires with the appropriate wire bundle using twist-on wire connecters. |
|---|---|
| + | [* green] Reinstall the light pull-switch into the circuit by terminating the hot and neutral wires with the appropriate wire bundle using twist-on wire connecters. After the completion of this step, there should be 4 white wires connected using one twist on wire connector, and 2 black wires connected using a second twist-on wire connector. |
| + | [* icon_note] ***NOTE:*** Wire color-coding in accordance with the NFPA 70 - National Electrical Code is applicable. White wires are designated as neutral wires, black wires are designated as hot wires. |