Cambios al paso #2
Editado por Peyton Stewart —
Edicion aprobada por Peyton Stewart
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* red] Please note the first picture shows what the feet look like, the upper two feet are already removed. Next remove the 2 upper feet using a plastic removal tool if they are still in place. The upper feet are closer to the hinges for the screen. After this, remove the 2 Torx T8M2.0x9.0 screws under the feet. | |
| [* orange] These are the final screws needed to be removed to remove the back panel. In total, you should remove 8 screws between Steps 1 and 2. | |
| + | [* icon_reminder] Keep track of all screws. |