Cambios al paso #10
Editado por Justin Ogihara —
Edicion aprobada por Justin Ogihara
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* black] (Recommended) Seal the Heat Shrink Tubing by holding the flame of a lighter directly on the tubing, moving it back and forth until the tubing molds itself to the wires. Do not let the flame linger for too long, or you run the risk of ruining the seal. |
|---|---|
| - | [* icon_note] If heat shrink is unavailable electrical tape works just as well. |
| + | [* black] Seal the Heat Shrink Tubing by holding the flame of a lighter directly on the tubing, moving it back and forth until the tubing molds itself to the wires. |
| + | [* icon_caution] Do not let the flame linger for too long, or you run the risk of ruining the seal. |
| + | [* icon_note] If heat shrink is unavailable, electrical tape works just as well. |