Cambios al paso #6
Editado por Hezekiah Brown —
Edicion aprobada por Hezekiah Brown
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [title] |
|---|---|
| + | [title] DIMM A Connector RAM - Step 2 |
| [* icon_caution] Insert memory modules at a 45-degree angle to avoid damaging the connector. If the memory module is not installed properly, the computer may not boot properly. No error message indicates this failure. | |
| [* black] Ground yourself and install the new memory module by aligning the notch in the module edge connector with the tab in the connector slot. | |
| - | [* black] Slide the module firmly into the slot |
| + | [* black] Slide the module firmly into the slot, and rotate the module down until it clicks into place. If you do not feel the click, remove the module and reinstall it. |