Cambios al paso #1
Editado por Austin Blakely —
Edicion aprobada por Austin Blakely
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* icon_ |
|---|---|
| - | [* red] Remove the |
| - | [* orange] Use |
| + | [* icon_caution] Power off your XPS 15 before beginning the disassembly. |
| + | [* red] Remove the ten 3mm T5 Torx screws located on the outer perimeter of the device. |
| + | [* orange] Use a Phillips #00 screwdriver to remove the two 10mm screws under the flip up plate. |
| [* black] Remove the rear panel using a plastic spudger. Its easiest to start from the top and work your way to the bottom. |