Cambios al paso #1
Editado por Garrett Anderson —
Edicion aprobada por Garrett Anderson
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* icon_caution] Attach ESD strap around your wrist and to a ground. | |
| [* black] Using both thumbs, locate the two metal clips and pull them apart, allowing the RAM chip to pop upwards. | |
| - | [* black] Pull the RAM chip straight out and repeat for the second RAM chip. |
| - | [* black] Install the new RAM chip(s) by seating the chip firmly in the RAM slot and push down until the metal clips snap in place. |