Cambios al paso #5
Editado por Sarah Westberg —
Edicion aprobada por Sarah Westberg
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* |
|---|---|
| + | [* red] Using the Phillips #1 screwdriver, remove the two 37mm screws on the back of the motor. |
| [* icon_note] Beware that there is a nut holding the screw in place on the opposite side of the motor. | |
| [* icon_note] Beware once the screw is removed the metal brace where the screws are located will come off. |