Saltar al contenido principal

Cambios al paso #1

Editado por Tanmayi Ambati

Edicion aprobada por Tanmayi Ambati

Antes
Después
Sin cambios

Líneas de Paso

+[* red] Remove two #00 Philip screw located on the right side beneath the front panel
+[* orange] Use the black spudger to unclip the ribbon and then remove it using the nylon tipped tweezers
+[* yellow] Remove two #00 Philip screws located on the left side panel with the microphone connection
+[* black] Once its unclipped, remove the side panel.

Imagen 1

Ninguna imagen anterior

Añadido

Imagen 2

Ninguna imagen anterior

Añadido

Imagen 3

Ninguna imagen anterior

Añadido