Cambios al paso #4
Editado por Tanmayi Ambati —
Edicion aprobada por Tanmayi Ambati
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* black] Keep the LCD screen open before taking off the back panel |
|---|---|
| - | [* black] Use the opening tool to pry off the back panel |
| - | [* icon_note] Don't completely pull off the back panel because there is still a ribbon attached |
| - | [* red] Use the black spudger to unclip the ribbon located behind the battery compartment. Then remove it using the nylon tipped tweezers |
| + | [* black] Keep the LCD screen open, as shown in step 2, before taking off the back panel. |
| + | [* black] Use the opening tool to pry off the back panel. |
| + | [* icon_note] Don't completely pull off the back panel because there is still a ribbon attached. |
| + | [* red] Use the black spudger to unclip the ribbon located behind the battery compartment. Then remove it using the nylon tipped tweezers. |
| [* black] Once the ribbon is unplugged, remove the back panel from the camera body. |