Cambios al paso #2
Editado por garrett knox —
Edicion aprobada por garrett knox
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* red] Remove to screws holding on cover plate on the pivot. | |
| - | [* black] Proceed to remove the cover plat using |
| + | [* black] Proceed to remove the cover plat using plastic opening tool. May be necessary to loosen bottom first then pry on the top of cover plate. This photo is shown in photo two. |
| [* red] Proceed to remove the two screws on top of the swivel arm. These two screws will be separated by pivot point. One on either side of the screen. A screw will be shown in photo three. |