Cambios a este Paso
Editado por John Donahue —
Edicion aprobada por John Donahue
- Antes
- Después
- Sin cambios
Líneas de Paso
| + | [* black] Locate and remove one 3mm x 3mm screw from the side of the caddy assembly and separate the hard drive from the caddy. |
|---|---|
| + | [* icon_reminder] Gently slide the new hard drive back into the laptop when replacing. You should encounter minor resistance when reinserting it into the laptop. This resistance is the power and data contacts sliding in. If it hits a hard stop you may have oriented the caddy incorrectly and will need to rotate it 180 degrees and insert the hard-drive again. |