Saltar al contenido principal

Cambios al paso #1

Editado por Changyi Yu

Edicion aprobada por Changyi Yu

Antes
Después
Sin cambios

Líneas de Paso

[* black] Start by flipping the laptop over and locate the two screws. (they should be located in a dense on the back of the laptop)
[* black] Then use a screwdriver to remove the two, deeply recessed, 2.5mm x 5mm screws from the bottom face of the laptop.
+[* black] After place the two screws in a safe place as without them you won't have a keyboard brazel to protect the inner systems.