Cambios al paso #4
Editado por Landon Connolly —
Edicion aprobada por Landon Connolly
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* black] Remove the 4 screws that fasten the speaker to the inside of the amplifier. |
|---|---|
| + | [* black] Use wire cutters to snip wires connecting to the speaker. Be sure to cut wires as close as possible to where they connect. |
| + | [* black] To reattach wires to your new speaker, visit "[[Topic:Soldering"]] by iFixit. |