Partes

No se requieren partes.

  1. Place CHiP on its back so that its stomach is facing you.
    • Place CHiP on its back so that its stomach is facing you.

  2. There are three small hex screws connecting the battery to CHiP. Remove all screws with a hex screwdriver and remove battery casing.
    • There are three small hex screws connecting the battery to CHiP. Remove all screws with a hex screwdriver and remove battery casing.

    • Once the top face of the battery is off, you will see a small rectangular box that the batteries are inside. There are 4 Phillips head screws in the box. Remove all screws with a Phillips head screwdriver.

    • Once the battery is removed from body, the battery should be connected by a red and black wire. There is a red rectangular connector that easily pulls apart. Pull apart the red rectangular connector.

    • Remove the 4 Phillips screws shown.

    • Pull up top part of toy and remove the connecting wires.

    • Unscrew the 2 Phillips head screws. CHiP should be viewed as seen in the third picture.

    • Remove the 4 Phillips screws to separate the head from the body.

    • Remove the 4 Phillips screws on back of the head, and pull off the casing for the back of the head.

    • Unscrew the screw on the ear with a Phillips screwdriver, and pull off the plastic connector. Remove the ear from head.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 13

Últimos 30 Días: 61

Todo El Tiempo: 98