Walker WP3208LCD Stuck In Standby
Introducción
Ir al paso 13 x capacitors need replacing in this TVs should you find its stuck in standby.
You should notice they are bulging, 2 x 4700uF 6.3v & 1 x 100uF 50v. Highlighted in red on picture attached, hope it helps someone out.
Qué necesitas
Herramientas
-
-
3 x capacitors need replacing in this TVs should you find its stuck in standby.
-
You should notice they are bulging, 2 x 4700uF 6.3v & 1 x 100uF 50v.
-
Highlighted in red on picture attached, hope it helps someone out.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
26 personas más completaron esta guía.
