/
Mi Mesa de Trabajo

Obtén acceso rápido a guías, piezas y respuestas para tus dispositivos

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Unete
Iniciar sesión
Únete a la comunidad de reparación más grande del mundo
Verizon Ellipsis 10 Motherboard Replacement

Verizon Ellipsis 10 Motherboard Replacement

Marco Bellutta

Marco Bellutta y 5 otros contribuidores

Última actualización: May 7, 2024

30 minuto
Moderado
Herramientas Incorrectas
Mejor introducción

Introducción

Ir al paso 1

This guide is designed to provide you with simple steps to remove and replace the Verizon Ellipsis 10 Motherboard.

Qué necesitas

Herramientas

Ver más…

  1. Verizon Ellipsis 10 Motherboard Replacement, Back Cover: paso 1, imagen 1 de 1

    • Open the SD/SIM card cover to start prying off the back cover.

    Editar

    Can I rig up a tool this was gave to me

    Luckily SD card still in tac I let a friend use it for Netflix it was plugged in all nite while watching it could that be the reason it won't come on

    ribinstick48 - Contestar

  2. Verizon Ellipsis 10 Motherboard Replacement: paso 2, imagen 1 de 1

    • Start using the iFixit Opening Tool in the SD/SIM area to release the clips holding the back panel on.

    Editar

  3. Verizon Ellipsis 10 Motherboard Replacement: paso 3, imagen 1 de 1

    • Follow along the edge of the device to undo all of the retaining clips.

    Editar

  4. Verizon Ellipsis 10 Motherboard Replacement: paso 4, imagen 1 de 1

    • Once all the clips are undone, the back panel should come off with little effort.

    Editar

  5. Verizon Ellipsis 10 Motherboard Replacement, Battery: paso 5, imagen 1 de 1

    • Remove the bottom piece of tape securing the battery making sure you are not peeling up anything else in the process.

    Editar

  6. Verizon Ellipsis 10 Motherboard Replacement: paso 6, imagen 1 de 1

    • Remove the top piece of tape using an iFixit opening tool.

    Editar

  7. Verizon Ellipsis 10 Motherboard Replacement: paso 7, imagen 1 de 1

    • Once you have a hold on the tape, carefully remove it making sure you aren’t damaging the battery in the process.

    Editar

  8. Verizon Ellipsis 10 Motherboard Replacement: paso 8, imagen 1 de 1

    • Unplug the battery power connector by sliding the white plastic plug down away from the board.

    Editar

  10. Verizon Ellipsis 10 Motherboard Replacement: paso 9, imagen 1 de 1

    • The battery should be free to come out of the device. Make sure not to bend or damage the battery.

    Editar

  11. Verizon Ellipsis 10 Motherboard Replacement, Camera: paso 10, imagen 1 de 1

    • Remove 4 M1.5 screws holding in the labeled LTE module.

    Editar

  12. Verizon Ellipsis 10 Motherboard Replacement: paso 11, imagen 1 de 1

    • Use a nylon spudger to pry up the module.

    • It's held in with some clips so there will be a little bit of resistance.

    Editar

  13. Verizon Ellipsis 10 Motherboard Replacement: paso 12, imagen 1 de 2 Verizon Ellipsis 10 Motherboard Replacement: paso 12, imagen 2 de 2

    • Remove the 4 M1.5 screws holding in the labeled auxiliary LTE/GPS module.

    • The module should come up with a little resistance.

    Editar

  14. Verizon Ellipsis 10 Motherboard Replacement: paso 13, imagen 1 de 1
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Añadir a la cesta

    • Use a pair of tweezers to lift up the front camera off its locating post.

    Editar

  15. Verizon Ellipsis 10 Motherboard Replacement: paso 14, imagen 1 de 2 Verizon Ellipsis 10 Motherboard Replacement: paso 14, imagen 2 de 2

    • Remove the non-conductive tape covering the camera ribbon cable.

    • You may need to remove the white antenna cable to remove the tape.

    Editar

  16. Verizon Ellipsis 10 Motherboard Replacement: paso 15, imagen 1 de 1

    • Carefully unplug the ribbon cable from the motherboard.

    Editar

  17. Verizon Ellipsis 10 Motherboard Replacement: paso 16, imagen 1 de 2 Verizon Ellipsis 10 Motherboard Replacement: paso 16, imagen 2 de 2

    • Peel up the ribbon cable carefully as it is glued to the device.

    • After having peeled up the cable, the cameras should be free to come out of the device.

    Editar

  18. Verizon Ellipsis 10 Motherboard Replacement, Motherboard: paso 17, imagen 1 de 1

    • Remove the non-conductive tape covering two ribbon cables.

    Editar

  19. Verizon Ellipsis 10 Motherboard Replacement: paso 18, imagen 1 de 1

    • Gently unplug both the orange and white ribbon cables.

    Editar

  20. Verizon Ellipsis 10 Motherboard Replacement: paso 19, imagen 1 de 1
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Añadir a la cesta

    • Use tweezers to pry/disconnect both the black and white antenna cables from the top of the motherboard.

    Editar

  21. Verizon Ellipsis 10 Motherboard Replacement: paso 20, imagen 1 de 1

    • Unplug the last ribbon cable from the bottom of the motherboard.

    Editar

  22. Verizon Ellipsis 10 Motherboard Replacement: paso 21, imagen 1 de 1

    • Remove all M1.5 screws holding in the motherboard.

    Editar

  23. Verizon Ellipsis 10 Motherboard Replacement: paso 22, imagen 1 de 1

    • Once all screws are removed, the motherboard should easily come off the device without any resistance.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

1Guía Comentario

my Verizon se apaga cuando subo el volumen,que sera?

Gabriela Monti - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 3

Todo El Tiempo: 382