Repara tus cosas

Derecho a reparar

Tienda

Removing Fender Frontman 15r Back panel

Escrito Por: Greg Sawers (y 4 de otros participantes)
  • Comentarios: 0
  • Favoritos: 2

Dificultad

Fácil

Pasos

3

Tiempo Requerido

5 minutos

Secciones

1

Banderas

0

Introducción

Need to get inside the amp? Remove the back panel!

  1. Be sure to unplug the device before proceeding.

    • Be sure to unplug the device before proceeding.

    • Use a Phillips #0 screwdriver to remove the four 21.7mm screws holding the back panel to the frame.

    Editar

  3. Once the screws are out, use a plastic opening tool or spudger to pry the top of the back panel open. There may be some resistance, but it will eventually pry loose.

    • Once the screws are out, use a plastic opening tool or spudger to pry the top of the back panel open. There may be some resistance, but it will eventually pry loose.

    Editar

  4. Once the top is separated, use your hand to remove the back panel from the unit.

    • Once the top is separated, use your hand to remove the back panel from the unit.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 4 otros colaboradores

Greg Sawers

Miembro Desde 27/09/12

79 Reputación

3 Guías creadas

Insignias: 8

+ 5 más insignias

Equipo

Cal Poly, Team 24-30, Regan Fall 2012 Miembro de Cal Poly, Team 24-30, Regan Fall 2012

CPSU-REGAN-F12S24G30

5 Miembros

7 Guías creadas

0 comentarios

Agregar un comentario

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 11

Ultimos 30 días: 43

Todo El Tiempo: 5,206