Introducción

This guide will show you how to add or replace the RAM in your Toughbook CF-29.

Partes

No se requieren partes.

  1. Locate the bay door for the battery on the left side of the laptop.
    • Locate the bay door for the battery on the left side of the laptop.

    Agregar Comentario

  2. Slide the latch to the right and then down to unlock it.
    • Slide the latch to the right and then down to unlock it.

    • Pull out the battery.

    Agregar Comentario

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Use a Phillips size 0 screwdriver to remove the 4 screws holding down the ram cover.

    Agregar Comentario

    • Pull the clips aside to release and remove the RAM.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Equipo

Cal Poly, Team 27-93, Amido Spring 2010 Miembro de Cal Poly, Team 27-93, Amido Spring 2010

CPSU-AMIDO-S10S27G93

4 Miembros

12 Guías creadas

Thanks for sharing this. I just bought a panasonic toughbook from http://buytough.com and I think this will come in handy. :)

Katie Sutton - Contestar

there is another ram slot you failed to mention

sparkynaz - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 2

Últimos 7 Días: 3

Últimos 30 Días: 13

Todo El Tiempo: 17,599