LG G4 Screen Assembly Replacement

Sam Goldheart y 2 otros contribuidores

Última actualización: October 1, 2024

30 minuto

Moderado

Guía Destacada

Introducción

Ir al paso 1

Learn how to replace the full screen assembly, including the LCD, digitizer, and display frame.

This guide does not cover removing the fused glass display and digitizer from the display frame, so if your part is missing the supporting frame, follow the more complicated LCD Digitizer replacement guide instead.

Qué necesitas

Partes

LG G4 Display Assembly
Sale price $19.99
Ver

Herramientas

Paso 1 Back Cover

LG G4 Screen Assembly Replacement, Back Cover: paso 1, imagen 1 de 1

Make sure the phone is powered off.
Remove the rear cover by placing the plastic opening tool in the groove on the bottom left side of the LG G4 and gently prying up.

Traducir

Paso 2

Place the plastic opening tool at the bottom edge of the battery and lift up. Carefully remove battery with your hands.

Traducir

Paso 3

LG G4 Screen Assembly Replacement: paso 3, imagen 3 de 3

Remove the eleven 3.9 mm Phillips #00 screws found at the back of the phone.

Traducir

Paso 4

LG G4 Screen Assembly Replacement: paso 4, imagen 3 de 3

Once all the screws have been removed, place the plastic opening tool in the lower left corner and firmly lift the cover up.
Detach the cover with your fingers

Traducir

Paso 5 Motherboard

LG G4 Screen Assembly Replacement, Motherboard: paso 5, imagen 1 de 2

LG G4 Screen Assembly Replacement, Motherboard: paso 5, imagen 2 de 2

Remove the following four press-fit connectors with the flat edge of a plastic spudger or opening tool:
Front-facing camera connector.
Rear-facing camera connector.
Digitizer connector.
The rear-facing camera may be held down to the frame with two sided tape. Try to move the camera with the spudger prior to lifting the motherboard If it does not budge, use the same tool to pry it from the frame to avoid damaging the connector cable in the next step.

Traducir

Paso 6

Remove the motherboard by lifting it up using the plastic opening tool and your fingers .

Traducir

Paso 7 Screen Assembly

LG G4 Screen Assembly Replacement, Screen Assembly: paso 7, imagen 1 de 1

Use a heat gun or iOpener over the auxiliary port to soften the adhesive that secures it to the plastic housing.

Traducir

Paso 8

Herramienta utilizada en este paso:

Spudger

$2.99

Añadir a la cesta

Insert a nylon spudger into the auxiliary port and gently pry upward to free the port.

Traducir

Paso 9 Other components

LG G4 Screen Assembly Replacement, Other components: paso 9, imagen 1 de 1

You may also need to remove the vibration motor (the small circular component with two gold contacts), ear-speaker, and two rubber covers on either side of the ear-speaker to transfer these over to the new display assembly.
Use a spudger to carefully remove these components and then place them in the new display assembly..

Traducir