Repara tus cosas Comunidad Tienda

Kenmore 110 Series Washing Machine Water Pump Replacement

Introducción

Use this guide to replace a faulty water pump on your Kenmore 110 Series Washing Machine.

Qué necesitas

  1. Kenmore 110 Series Washing Machine Water Pump Replacement, Water Pump: paso 1, imagen 1 de 1

    • Unplug the washing machine!

    • Carefully lay washing machine on its back.

    Editar

  3. Kenmore 110 Series Washing Machine Water Pump Replacement: paso 2, imagen 1 de 3 Kenmore 110 Series Washing Machine Water Pump Replacement: paso 2, imagen 2 de 3 Kenmore 110 Series Washing Machine Water Pump Replacement: paso 2, imagen 3 de 3

    • Carefully remove both wire harnesses connected to the pump.

    • Squeeze and pull back hose clamp.

    • Twist drain hose off of pump.

    • Using a 1/4" socket wrench, remove the three mounting screws.

    • Pull the pump out of place.

    • Pulling the pump away takes a little force.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

14 personas más completaron esta guía.

Autor

con 5 otros colaboradores

Robert Trout

Miembro Desde 09/26/12

1,234 Reputación

5 Guías creadas

Insignias: 11

+ 8 más insignias

Equipo

Cal Poly, Team 15-43, Forte Fall 2012 Miembro de Cal Poly, Team 15-43, Forte Fall 2012

CPSU-FORTE-F12S15G43

5 Miembros

11 Guías creadas

9 comentarios

please provide info on how to test the water pump once it's removed...

Oscar Ramos - Contestar

The instructions say nothing of the pulley belt and wheel.

I'm looking to work on a 110. 81080100

and

I have read that transmission fluid leaks out when the washer is on its side.

Is there a way to temporarily plug it?

thomas - Contestar

My clothes are still really wet.

Tracy Schultz - Contestar

Washer doesn't move doesn't do any thing it just hummus won't drain water

Hector Rios - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 12

Ultimos 7 días: 87

Ultimos 30 días: 340

Todo El Tiempo: 58,686