Saltar al contenido principal

HP Stream 8 Speakers Replacement

Qué necesitas

  1. HP Stream 8 Speakers Replacement, Midframe: paso 1, imagen 1 de 1
    • Use your nail or a spudger to pry the back cover off of the device.

  2. HP Stream 8 Speakers Replacement: paso 2, imagen 1 de 1
    • Slide your finger around the rest of the back cover, lifting it completely off of the device.

  3. HP Stream 8 Speakers Replacement: paso 3, imagen 1 de 1
    • Remove ten Phillips #00 screws from the inside cover.

  4. HP Stream 8 Speakers Replacement: paso 4, imagen 1 de 1
    • Pry up the inside cover the same way as in the first step.

  5. HP Stream 8 Speakers Replacement, Speakers: paso 5, imagen 1 de 2 HP Stream 8 Speakers Replacement, Speakers: paso 5, imagen 2 de 2
    • Locate the two speakers at the bottom of the device.

    • Remove the two speakers by prying them out using a pair of tweezers.

    • Detach the red and black power wiring from the device and pull the speakers entirely out of the HP Stream 8.

    • Remember where the red and black wiring is connected to the device.

    • The power wires are soldered to the device and will be difficult to detach.

  6. HP Stream 8 Speakers Replacement: paso 6, imagen 1 de 1
    • Grab the two replacement speakers and the soldering iron.

    • Locate where the red and black power wiring previously connected to the device.

    • Attach and re-solder the red and black power wiring.

    • For soldering help, check out iFixit's How to Solder and Desolder Connections guide.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Nick Miller

Miembro Desde 04/11/16

669 Reputación

6 Guías creadas

Equipo

Cal Poly, Team 34-14, Maness Spring 2016 Miembro de Cal Poly, Team 34-14, Maness Spring 2016

CPSU-MANESS-S16S34G14

4 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 306